|
|
BAGHOUSE
DUST COLLECTORS
Scientific
Dust Collectors manufactures a full line of Baghouse Dust Collectors to
meet the needs of your specific operation. For over 28 years, SDC has
provided customers with unmatched cleaning performance due to our
superior cleaning system that employs a patented supersonic nozzle to
clean the filters more effectively than any of our competitors.
Baghouse Dust Collectors are ideally suited to capture dusts that are
larger or more difficult to clean. Dusts that are high temperature or
hygroscopic are better suited for collection in baghouse dust
collectors. In addition, larger dust sizes (greater than 50 microns)
and higher grain loadings (over 5 grains per cubic foot) are ideal for
baghouse units. Dusts that have a tendency to form films that solidify
should be handled in fabric baghouse collectors. If hydrocarbons are
present in the airstream, the same problems may occur. For these types
of applications, baghouses are recommended because the dust cake may
require flexing before the cake will burst. Some examples of dust that
are collected using fabric filter baghouses are: flyash, coal, cement,
lime, fiberglass, paper, plastic, sawdust, and other stringy or
irregular shaped dusts.
|
TOP REMOVAL
Scientific
Dust Collectors' Supersonic Pulse Jet Top Removal (SPJ-T) Collector
is designed with a full walk-in plenum for easy bag access from the
clean side. It
utilizes the patented supersonic nozzle cleaning system as
well as a high-side inlet so that the heavier dust falls out of the air
stream. These features allow the collector to operate at higher
air-to-cloth ratios, lower pressure drops, and provide longer filter
life. The SPJ Series is a heavy duty reverse pulse jet dust collector
that operates continuously without requiring the process to be shut
down for cleaning. The walk-in feature on the SPJ-T Series allows
bag changeout from the clean side while not being exposed to the
elements. Our high side baffled inlet with dropout section
slows to less than 3000 FPM, which allows the large particles to simply
fall out of the airstream into the hopper. Our bag spacing of three (3)
inches between bags is the widest spacing in the industry. This reduces
reentrainment of the dust. Our nozzle based cleaning system eliminates
the venturi at the top of the bag/cage. This allows us to get over
300% more cleaning air into the bag than other generic baghouses.We
gaurantee a stabilized pressure drop in our baghouse to be lower than
3.5"WC at full rated airflow.
Click
Here to see a brochure for the SPJ-T
Click
Here to see applications that have used the SPJ-T |
 |
|
RAILING TOP
Scientific
Dust Collectors' Supersonic Pulse Jet Railing Top (SPJ-RT) Collector is designed for
easy top bag removal from the clean side while maintaining low
headroom. It
utilizes the patented
supersonic nozzle cleaning system as well as a high-side inlet so that
the heavier dust falls out of the air stream. These features allow the
collector to operate at higher air-to-cloth ratios, lower pressure
drops, and provide longer
filter life. This design has all the same benefits and features as our
walk-in plenum design. The only difference is that the bags are
accessed through "lift-off" doors on the roof of the baghouse. The
Railing Top design allows bag access where outside temeprature is hot
enough to prohibit entry into a walk-in plenum.
Click
Here to see a brochure for the SPJ-RT
Click
Here to see applications that have used the SPJ-RT |
 |
|
BOTTOM
REMOVAL COLLECTOR
Scientific
Dust Collectors' Supersonic Pulse Jet Bottom Removal (SPJ-B) Collector
is designed for low-profile applications where headroom is a
factor. It utilizes the patented supersonic nozzle cleaning system as
well as a high-side inlet so that the heavier dust falls out of the air
stream. These features allow the collector to operate at higher
air-to-cloth ratios, lower pressure drops, and provide longer filter
life. This design also has all the same benefits and features as our
top bag access designs. The only difference is that the bags are
accessed from the dirty air side of the baghouse.
Click
Here to see a brochure for the SPJ-B
Click
Here to see applications that have used the SPJ-B |
 |
|
LOW
FLOW
BOTTOM REMOVAL COLLECTOR
Scientific
Dust Collectors' newest Supersonic Pulse Jet Low Flow Bottom Removal (SPJ-BL) Collector
is economically designed for low-flow applications (less than 5,000CFM)
and
low
static pressure (less than 14" SP). It utilizes the patented supersonic
nozzle cleaning system as
well as a high-side inlet so that the heavier dust falls out of the air
stream. These features allow the collector to operate at higher
air-to-cloth ratios, lower pressure drops, and provide longer filter
life.
Click
Here to see a brochure for the SPJ-BL
|
 |
|
BIN
VENT COLLECTOR
Scientific
Dust Collectors' Supersonic Pulse Jet Bin Vent (SPJ-BV) Collector
is designed specifically for storage tanks, silos, work bins,
and material receivers. It employs the patented supersonic nozzle
cleaning system which allows the collector to operate at higher
air-to-cloth ratios, lower pressure drops, and provide longer filter
life. We can provide powered (with a fan) and non-powered
(without a fan) bin vents. We can also customize the bottom flange to
match customers' required opening.
Click
Here to see a brochure for the SPJ-BV
Click
Here to
see applications that have used the SPJ-BV |
 |
|
HORIZONTAL COLLECTOR
Scientific
Dust Collectors' Supersonic Pulse Jet Horizontal (SPJ-H) Collector is designed for
low headroom applications, similar to the SPJ-B Collector. It
utilizes the patented
supersonic nozzle cleaning system as well as a high-side inlet so that
the heavier dust falls out of the air stream. These features allow the
collector to operate at higher air-to-cloth ratios, lower pressure
drops, and provide longer
filter life. This special design uses horizontal bags that are
accessed from the clean side of the unit. This is a specialty
application unit where the dust is large and stringy, but there is a
low headroom requirement.
Click
Here to see a brochure for the SPJ-H
Click
Here to see applications that have used the SPJ-H
|
|
|
INSERT COLLECTOR
Scientific Dust Collectors' Supersonic
Pulse Jet Insert (SPJ-I)
Collector is designed for conveyors, tanks, silos, air slides,
cyclones, and
bins. This self-contained dust collector is integrated into a current
enclosure allowing dust to be retained where it is generated and can be
custom designed to meet specific needs. It utilizes the patented
supersonic nozzle cleaning system which allows for longer filter life
while operating
at higher air-to-cloth ratios, lower pressure drops, and provide
longer filter life. This special design is often used as a retrofit fix
to an existing baghouse, where the hopper and dirty air bins are in
good working order. The customer either wants to increase the bag life,
reduce the system pressure on the fan, or increase airflow through the
baghouse. SDC's retrofit design allows these changes to be effectively
made in all baghouses, including baghouses made by other manufacturers.
By providing our clean air section (insert) the customer obtains all
the benefits of our cleaning technology at a reduced cost.
Click
Here to see a brochure for the SPJ-I
Click
Here to see applications that have used the SPJ-I
|
|
|
|
